Avital G5103 - Manual (Page 34)

31 © 2 0 0 8 D i r e c t e d E l e c t r o n i c s — A l l r i g h t s r e s e r v e d
The following is a list of the programmable options, with the
factory settings in Bold.
➤ A Accttiivvee arming (transmitter only) or passive arming (auto-
matic arming 30 seconds after the last door has been closed).
➤ Arming/disarming siren chirps oon n or off.
➤ The ignition controlled door lock feature oon n or off: When
this feature is programmed on, the doors will lock three
seconds after the ignition is turned on, and unlock when the
ignition is turned off. If your installer is programming the
security system with the Directed Bitwriter ® , ignition lock
and unlock are independent features that can be
programmed separately.
➤ Passive door locking (with passive arming) or aaccttiivvee d doooorr
lloocckkiin ngg (only when arming with the transmitter). Passive
locking allows the vehicle's doors to lock when the security
system passively arms (after the 30-second countdown). This
feature only works if passive arming has been programmed.
➤ Panic mode een naab blleed d/disabled when the ignition is turned
on. (Some states have laws against sirens sounding in moving
cars.)
➤ Forced passive arming oon n or off. If your security system is
programmed for passive arming and the forced passive
arming feature has been programmed on, the system will
passively arm after one hour, even if a protected entry has
been left open. Forced passive arming ensures that the
system will be armed if a door has accidentally been left ajar
when leaving the vehicle.
G5103_2008-06F.qxd 7/9/2008 10:39 AM Page 31