Avital G5103 User Manual
Page 35
32
© 2 0 0 8 D i r e c t e d E l e c t r o n i c s — A l l r i g h t s r e s e r v e d
➤
Full trigger response 3
30
0 or 60 seconds: This determines how
long the full triggered sequence lasts. Some states have laws
regulating how long a security system can sound before it is
considered a nuisance. If your installer is programming the
security system with the Directed Bitwriter
®
, the full trig-
gered response can be programmed for any duration ranging
from 1 to 180 seconds.
➤
Siren tones and chirp volume. The output of the Revenger
™
Soft Chirp
™
siren consists of six different tones in sequence.
Any of these tones can be eliminated by a dealer, resulting in a
unique, easily identifiable siren sound. The chirps can be either
full volume or 6
6 d
deecciib
beellss q
qu
uiieetteerr than the full alarm blast.
➤
12, 24, or 60 minute run time. your system can be
programmed to allow the vehicle to run for 12, 24, or 60
minutes when remote started. Can be set up to minute
increments by your installer.
➤
3, 6, 9, or 12 minute timer mode run time. Your system can
be programmed to allow the vehicle to run for 3, 6, 9, or 12
Note: This feature will only function if the FailSafe
®
Starter Kill relay has been installed.
Note: When the system passively arms after one hour, the
entry point that has been left open, and anything con-
nected to the same zone, is bypassed and cannot trigger
the system. However, the remaining inputs to the system
are fully operational.
G5103_2008-06F.qxd 7/9/2008 10:39 AM Page 32