Quick reference guide – Avital G5103 User Manual

Page 40

Advertising
background image

37

© 2 0 0 8 D i r e c t e d E l e c t r o n i c s — A l l r i g h t s r e s e r v e d

Quick reference guide

Arming

■ To arm, press

. When the system arms, you will hear a short chirp, and

the parking lights will flash once.

Arming while driving

■ To arm the system while driving, press

on your transmitter while the

vehicle is running. The system will chirp once and then once more to indi-
cate that the ignition is on.

Disarming

■ To disarm, press

. You will hear two chirps, and the parking lights will

flash twice.

High security disarm

■ For high security disarm, press

on your transmitter and the siren will stop

sounding. To completely disarm the security system, press again and the
system will chirp 4 or 5 times (reporting the trigger).

Disarming without a transmitter

■ Turn on the ignition. Press the Valet button within 15 seconds. The system

should now disarm. If it does not, you may have waited too long, so turn the
ignition off and on and try again.

Silent Mode

■ Pressing

briefly before arming or disarming will eliminate the confirma-

tion chirp(s) for that one operation only.

Panic Mode

■ Press

for 2 seconds, and you will enter Panic Mode. The siren will sound

and the parking lights will flash for 30 seconds. To stop Panic Mode at any
time, press

on the transmitter again.

To remote start the vehicle

■ Press

twice within 3 seconds. The parking lights will turn on (if

connected) and the vehicle will start and run for the programmed period of
time.

To disable the remote start system

■ To disable the remote start, move the shutdown toggle switch to the OFF

position.

Cut along dotted line and f

old f

or a quick and eas

y

r

efer

ence to k

eep in y

our pur

se or w

allet.

G5103_2008-06F.qxd 7/9/2008 10:39 AM Page 37

Advertising