Panasonic ER5209 - Manual (Page 2)

2
English
Safety instructions
Failure to observe the Safety instructions may result in death,
serious injury, electric shock, fire or short circuit.
1 Be careful when treating the AC adaptor
• Disconnect the AC adaptor from the outlet when cleaning the
clipper.
- Always grip the AC adaptor and not the power cord.
• Do not use the clipper if the power cord or the AC adaptor is
worn, or if the AC adaptor does not fit snugly in the outlet.
• Do not damage or deform the power cord. Do not place heavy
objects on the power cord or trap it between objects.
• Clean the power plug regularly to remove any dust or dirt.
1 Keep out of liquid
• Do not use the clipper with AC operation in bathrooms.
• Do not insert and remove the AC adaptor with wet hands.
• Do not allow the AC adaptor to get wet.
• Do not wipe the clipper or AC adaptor with thinner, benzine or
alcohol.
1 Failure to observe the following may result in injuries to
the skin
• Do not press the blade against the skin.
• Do not use the clipper for any purpose other than trimming.
• Do not trim the hair of a pet.
• Check that the blades are not damaged or deformed before use.
• Before using each time, apply oil at the places marked with
arrows. (See page 5.)
1 Caution for charge
• Charging for longer than 48 hours may shorten the life of the
battery.
• The clipper may become warm during operation and/or charging.
This is normal.
• Charge the clipper at temperatures between 0 °C and 40 °C
(32 °F and 104 °F) to work correctly.
• Do not use any power cord or AC adaptor other than one
specifically designed for this model. (RE5-97)
1 Caution for usage and storage
• Do not disassemble or modify the clipper. Do not attempt repairs.
- Repairs must always be requested to your dealer.
• Keep out of the reach of children.
• This clipper is for indoor use only.
• Do not store the clipper in a place exposed to direct sunlight or
near a heater or other source of heat.
Specifications
Power source: 230 V AC, 50 Hz
Motor voltage: 1,2 V DC
Charging time: 8 hours
Airborne Acoustical Noise: 64 (dB (A) re 1 pW)
Parts identification
A Blade
B Attachment mounting
C Switch
D Charging indicator lamp
E 3/6mm comb attachment
F 9/12mm comb attachment
G 15/18mm comb attachment
H Natural cutting attachment
I Thinning (1/3) attachment
J 20/30/40mm comb attachment
K 50/60/70mm comb attachment
L Lever for cleaning
M AC adaptor
N Power cord
O Oil
P Cleaning brush









20 30 40
mm
50 60 70
mm
3 mm 6







ER5209(EU).indb 2 2007/02/22 18:09:48