Panasonic ER5209 - Manual (Page 5)

English
5
Cleaning the blade
1 If washing in water
Warning - Detach the hand held part from the power cord before
cleaning it in water.
1. Rinse off any hairs
sticking to the blade and
any hairs inside the
clipper.
2. Shake the clipper 4 or 5
times gently, wipe off any
water drops from the
clipper and blade, and
then let it dry onto a towel
with the “Washable”
indicator facing upward.
1 If cleaning with brush
1. Brush off
any hairs
from the
clipper and
from around
the blade.
2. Remove the
blade and
brush off
the hairs
from the
blade edge.
3. Brush the hairs out
from between the fixed
blade and the moving
blade while pressing
down on the lever for
cleaning to raise the
moving blade.
1 After cleaning the blade with water or brush
1. Apply a few drops of the oil to
the points indicated by the
arrows.
2. Remount the blade on the
clipper.
• Apply the oil to the clipper after use.
Otherwise the blades may become dull,
make abnormal noises, or becomes hot
and lead to the deterioration of cutting
performance.
Removing the built-in rechargeable battery
Remove the battery as illustrated.
• Disconnect the clipper from the outlet when removing the battery.
• Fully discharge the battery.
• Be careful not to short the + and - terminals of the battery after
removing it.
Important notice regarding environmental protection
The built-in rechargeable Nickel-Metal Hydride battery contains
substances that may be environmentally harmful. Please remove
the battery before discarding your clipper.
ER5209(EU).indb 5 2007/02/22 18:09:50