Panasonic VWBN1 - Manual (Page 11)

11
LSQT1269
¬ Accessories
Check the accessories before using this
unit.
¬ Parts identification and
handling
1 Eject button [<]
2 Access lamp [ACCESS] (P12)
3 Disc insertion slot
4 Power lamp [POWER]
≥ This indicator lights when the unit is
connected to the AC mains supply.
5 USB terminal [ ]
6 DC input terminal [DC/C.C.IN 5.0 V]
≥ Do not use any other AC adaptors
except the supplied one.
¬ Power supply
The unit is in the standby condition when
the AC adaptor is connected. The primary
circuit is always “live” as long as the AC
adaptor is connected to an electrical outlet.
1 Connect the AC mains lead to the
AC adaptor A.
2 Connect the AC mains lead to the
AC outlet.
3 Connect the AC adaptor to this
unit’s DC input terminal
[DC/C.C.IN 5.0 V].
≥ The power lamp B lights up.
≥ The AC mains lead is for use with this
unit only. Do not use it with other devices
or use the AC mains lead for other
devices with this unit.
≥ The unit and the disc heat up during use.
This is not a malfunction.
AC adaptor
VSK0692
AC mains lead
A K2CT3CA00004
United Kingdom,
Hong Kong Special
Administrative Region of
China and Saudi Arabia
B K2CJ2DA00011
Australia and New Zealand
C K2CR2DA00004
Areas Other than United Kingdom,
Hong Kong Special Administrative
Region of China, Australia,
New Zealand and Saudi Arabia
Mini AB USB
Connection Cable
K2KZ59B00002
A
B
C
2 3 4 1
6 5
B A
1
3
2
LSQT1269.book 11 ページ ２００７年７月２３日 月曜日 午後４時２２分