Audio2000's AKJ7809 - Manual (Page 11)

8
DVD Output Connections
2.Connecting to a TV with component video
Using 3 appropriate component video cables (usually color coded red, blue and green), connect a set of plugs
to the COMPONENT VIDEO OUT jacks (Y-U/Pb-V/Pr) on the and plug the other set of plugs to the
COMPONENT VIDEO IN jacks (Y-U/Pb-V/Pr) on your television. On some TVs, the component video input jacks
may be labeled diff-erently (i.e. Pr/Pb/Y or Cr/Cb/Y or R-Y/B-Y/Y etc.). You will need to press the MODE button
on the remote control to toggle between YUV for Component Video, and S-Video. You can only use the MODE
button when there is no disc inserted in the disc tray.
AKJ7809
DVD OUTPUT CONNECTIONS
1.Connecting to a Dolby Pro logic amplifier
The
allows DVD audio output for 5.1 or 7.1 configurations.
With a 5.1 amplifier, you will need six RCA patch cables. Connect the plug from one side of each cable to the
ML, CEN, SL, MR, SW and SR outputs on the
. Connect the plug from the other side of each cable to
the corresponding ML, CEN, SL, MR, SW and SR inputs on your 5.1 amplifier.
A 7.1 Pro Logic configuration requires 2 additional RCA cables to be connected from the FL and FR outputs of
the
to your 7.1 Amplifier.
AKJ7809
AKJ7809
AKJ7809