Audio2000's AKJ7809 - Manual (Page 34)

Troubleshooting
1.There is no power
●Make sure the power cord is firmly connected to the back of the
9 and to the power outlet
●If using a power strip/surge-protector, make sure that it is plugged in and switched on
●Make sure the Power button on the front panel is pushed in to the on position
2.There is no sound
●Make sure everything is connected firmly and properly
●Make sure all of your components are turned on
●Make sure the
9 is set to the right input
●Make sure the proper volume controls are turned up high enough
3.No picture
●Make sure everything is connected firmly and properly
●Make sure there are no defective cables
●Make sure all of your components are turned on
●Make sure the
9 is set to the right input
●Make sure the TV or monitor is working correctly
4.The disc does not play
●Make sure the disc is inserted correctly (label-side up)
●Make sure the disc is clean and not scratched
●If using a CD/DVD R/RW, try using a different brand as some brands might not be compatible
●Clean the CD lens using a CD lens cleaner
5.Remote control does not work
●Make sure the batteries are inserted, inserted correctly, and not out of power
●Point the remote control directly at the remote sensor on the machine
●Move closer to the machine
6.The picture is unclear
●Make sure the disc is not dirty or damaged
●Make sure that the TV TYPE (P/N button on the remote) is set correctly:
NTSC: In North America, Japan and many other Asian countries
PAL: In Europe
●Try restarting the
9
7.The Music from an MP3 player or CD sounds hollow or very reverby
●Make sure the surround sound quality, using the SURROUND button on the remote control or front
panel, is set to MUSIC
AKJ780
AKJ780
AKJ780
AKJ780
31
Troubleshooting