AT&T E1225B - Manual (Page 15)

13
Telephone Operation
Call Forward and Call Transfer
Call Forward and Call Transfer
An external call can be forwarded or transferred from
one handset to the other. The difference between for-
ward and transfer depends on if the sending handset
needs to talk with the receiving handset before the
external call is sent to the other handset.
Call Forward
• The first handset (HS1) can forward an external call
to the other handset (HS2) by pressing and holding
the
INTERCOM
key. HS1 will display CALL FOR-
WARDED .
• To answer the call, HS2 can press
PHONE
,
SPEAKER
or any of the dial pad keys.
NOTE: If HS2 does not respond within 30 seconds, the external call
will be returned to HS1 and its display will show CALL BACK. If the returned
call is not answered within 30 seconds, the external call will end automatically.
Call Transfer
• HS1 can transfer an external call to HS2, by pressing
the
INTERCOM
key.
NOTE: The external call is put on hold automatically.
• HS2 will ring, showing an intercom call.
• Press
PHONE
,
INTERCOM
,
SPEAKER
or any dial pad
key on HS2 to answer the intercom call.
• HS1 and HS2 can discuss the external call.
NOTE: Press INTERCOM on HS1 to switch back and forth between
the intercom and outside call.
• Press
OFF
on HS1 to transfer the call. HS2 is now on
the external call. CALL TRANSFERRED will display
on HS1.
NOTE: If there is no answer on HS2 within approximately 1.5 minutes,
HS1 will automatically reconnect to the external call.
91-000153-041-000_E1225B_RO.qxd 2/13/1950 7:21 PM Page 13