AT&T E1225B - Manual (Page 29)

27
Answering System Operation
Message playback
Press
PLAY/STOP
to hear messages. The system
announces the number of messages, then begins playback.
If you have new messages waiting, you will hear only the
new messages (oldest first). If there are no new messages,
the system will play back all messages (oldest first).
Announcements
• When playback begins, you will hear the total
number of messages.
• Before each message, you will hear the day and time
it was received.
• After the last message, you will hear “End of mes-
sages.” If the system has less than 5 minutes of
recording time left, you will hear time remaining.
Options during playback
• Press
VOLUME
button to adjust speaker volume.
• Press
SKIP
to skip to next message (or hold down to
speed up message playback).
• Press
REPEAT
to repeat message currently playing.
Press twice to hear previous message. (Hold down
to slow message playback).
• Press
DELETE
to delete message being played back.
• Press
PLAY/STOP
to stop playback.
To delete all messages
To delete all messages, press and hold
DELETE
while
the phone is idle (not during a call, or during message
playback).
1.
“You have [xx] new
messages and [xx] old
messages”
Number of messages waiting
(or, during playback, message
number currently playing).
14
Message playback begins. See
options at right.
2.
Message playback ends.
NOTE: If “F” is flashing in
the message window, memory is
full. You will have to delete some
messages before new ones can
be received.
NOTE: New (unheard)
messages cannot be deleted.
Press PLAY/STOP to begin or
end message playback.
(Play/Stop)
(Play/Stop)
91-000153-041-000_E1225B_RO.qxd 2/13/1950 7:21 PM Page 27