AT&T E1225B - Manual (Page 17)

15
Telephone Operation
Handset settings
Handset name
At this menu you can customize the name that appears
on the handset screen when the phone is idle. Press
DELETE
to erase letters, then replace them with a
name of your preference, up to 16 characters long (see
page 17 to enter letters). Press
SELECT
to confirm.
Language
At this menu you can select the language used in all
menus and screen displays. Use the
^V buttons to
select English, Spanish or French, then press
SELECT
to
save your preference.
Dial Type
At this menu you can choose Tone or Pulse dialing. The
factory default setting is
TONE
. Change this to
PULSE
only if you do not have touch-tone dialing service.
Use the
^V buttons to select
TONE
or
PULSE
, then
press
SELECT
to save your preference.
CLR Voice Mail
If you subscribe to voice mail services provided by your
local telephone company, you will receive a text mes-
sage on the handset when you have new voice mail. To
manually remove the voice mail message on the display:
• Press
MENU
.
• Press the ^ or V button to highlight CLR VOICE
MAIL is selected.
• Press
SELECT
.
• Press
SELECT
again to remove the displayed mes-
sage, or press
OFF
to exit.
NOTE: This only turns off the displayed message on the handset, it
does not delete your voice mail message(s).
HANDSET NAME
AT&T_
LANGUAGE
ENGLISH
DIAL TYPE
TONE
>DIRECTORY
CALL LOG
>CLR VOICE MAIL
DIAL TYPE
TURN INDICATOR
OFF?
>CLR VOICE MAIL
DIAL TYPE
91-000153-041-000_E1225B_RO.qxd 2/13/1950 7:21 PM Page 15