Panasonic NVGS37EP - Manual (Page 33)

Playback mode
33
LSQT1005
Variable-speed search function
(NV-GS37 only)
The speed of cue/review playback can be varied.
(This operation is only available when using
the remote control.)
≥Set to Tape Playback Mode and play back a
tape.
1 Press the [VAR SEARCH] button on the
remote control.
2 Press the [ 3] or [4] button to vary the
speed.
≥The speeds for cue/review playback are 1/5k
(SP mode slow-motion playback only), 1/3 k (LP
mode slow-motion playback only), 2 k, 5k,
10 k, 20k.
ª To return to normal playback
Press the [VAR SEARCH] button or [PLAY 1]
button on the remote control.
≥Images may be shown in a mosaic-like pattern.
≥The sound is muted during search.
≥This function is cancelled when the operation
icon is displayed.
≥When you cue/review playback at 20k, the
speed switches to 10 k near the end of the tape.
([10 k] flashes on the screen.)
Playback on TV
Images recorded by this camera can be played
back on a TV.
≥Insert a recorded tape into this camera.
1 Connect the movie camera and a TV.
≥Connect the movie camera and a TV by using
the AV cable 1.
2 Turn on this camera and set the mode dial
to the Tape Playback Mode.
3 Select the input channel on the TV.
4 Move the joystick up to select the [ 1/;]
icon to start playback.
≥The image and audio are output on the TV.
5 Move the joystick down to select the [ ∫]
icon to stop playback.
≥Use the AC adaptor to free you from worrying
about the battery running down.
ª If the image or audio from this camera
is not output on the TV
≥Check that the plugs are inserted as far as they
go.
≥Check the [12bit AUDIO] settings. (
-35- )
≥Check the connected terminal.
≥Check the TV’s input setting (input switch).
(For more information, please read the
operating instructions for the TV.)
ª To display the on-screen information
on the TV
(NV-GS37 only)
The information displayed on the LCD monitor or
the viewfinder (operation icon, time code and
mode indication, etc.) can be displayed on the TV.
(This operation is only available when using
the remote control.)
1 Press the [EXT DISPLAY] button on the
remote control.
≥Press the button again to erase the
information.
1
[VIDEO IN]
[AUDIO IN]
A/V
LSQT1005ENG.book 33 ページ ２００５年１２月１６日 金曜日 午後３時１１分