Panasonic NVGS37EP User Manual

Page 45

Advertising
background image

Others

45

LSQT1005

ª

About the movie camera

≥When the movie camera is used for a long time,

the camera body becomes warm, but this is not
a malfunction.

Keep the movie camera away from
magnetized equipment such as a cellular
phones, microwave ovens, TVs, and video
game equipment.
≥If you use the movie camera on or near a TV,

images or sounds may be disturbed due to
electromagnetic wave radiation.

≥Recordings on the tape may be damaged, or

images may be distorted, by strong magnetic
fields created by speakers or large motors.

≥Electromagnetic wave radiation generated by

digital circuits including microprocessor may
adversely affect the movie camera, causing the
disturbance of images and sounds.

≥If the movie camera is affected by such

equipment and does not function properly, turn
off the movie camera power and detach the
battery or the AC adaptor. Then, connect the
battery or the AC adaptor again and turn on the
movie camera power.

Do not use your movie camera near radio
transmitters or high-voltage cables.
≥If you record pictures near radio transmitters or

high-voltage cables, recorded images or sounds
may be adversely affected.

Do not spray insecticides or volatile
chemicals onto the movie camera.
≥If the movie camera is sprayed with such

chemicals, the camera body may become
deformed and the surface finish may peel off.

≥Do not keep rubber or plastic products in

contact with the movie camera for a long time.

When you use your movie camera in a sandy
or dusty place such as on a beach, do not let
sand or fine dust get into the body and
terminals of the movie camera. Also, protect
the movie camera from getting wet.
≥Sand or dust may damage the movie camera or

cassette. (Care should be taken when inserting
and removing a cassette.)

≥If sea water splashes onto the movie camera,

wet a soft cloth with tap water, wring it well, and
use it to wipe the camera body carefully. Then,
wipe it again thoroughly with a soft dry cloth.

While carrying the movie camera, do not drop
or bump it.
≥A strong impact on the movie camera may

break its housing, causing it to malfunction.

Do not use benzine, paint thinner or alcohol
for cleaning the movie camera.
≥Before cleaning, detach the battery or pull out

the AC mains lead from the AC mains socket.

≥The camera body may be discoloured and the

surface finish may peel off.

≥Wipe the movie camera with a soft dry cloth to

remove dust and fingerprints. To remove
stubborn stains, wring well a cloth that is soaked
in a neutral detergent diluted with water and
wipe the movie camera with it. Afterwards, wipe
it with a dry cloth.

≥When you use a chemical dust cloth, follow the

instructions.

Do not use this movie camera for surveillance
purposes or other business use.
≥If you use the movie camera for a long time, the

internal temperature increases and,
consequently, this may cause malfunction.

≥This movie camera is not intended for business

use.

When you are not going to use the movie
camera for an extended time.
≥When storing the unit in a cupboard or a

cabinet, it is recommended that you put a
desiccant (silica gel) in with it.

ª

About the battery

The battery used in the movie camera is a
rechargeable lithium ion battery. This battery is
susceptible to temperature and humidity, and the
effect of temperature increases with increasing or
decreasing temperature. In the low temperature
range, the fully charged indication may not
appear, or the low battery indication may appear
about 5 minutes after the start of use. At high
temperature, moreover, the protection function
may work, disabling use of the movie camera.
Be sure to detach the battery after use.
≥If the battery is left attached to the movie

camera, a minute amount of current is
consumed even when the movie camera power
is [OFF]. If the battery is left attached to the
movie camera for a long time, over-discharge
takes place. The battery may become unusable
after it is charged.

≥The battery should be stored in a cool place free

from humidity, with as constant temperature as
possible. (Recommended temperature: 15

oC to

25

oC, Recommended humidity: 40% to 60%)

≥Extremely high temperatures or low

temperatures will shorten the life of the battery.

≥If the battery is kept in a high-temperature,

high-humidity, or oily-smoky places, the
terminals may rust and cause malfunctions.

≥To store the battery for a long period of time, we

recommend you charge it once every year and
store it again after you have completely used up
the charged capacity.

LSQT1005ENG.book 45 ページ 2005年12月16日 金曜日 午後3時11分

Advertising
This manual is related to the following products: