Panasonic NVGS80EP - Manual (Page 21)

Record mode
21
LSQT1130
ª On-screen display in the tape
recording mode
1) Recording time elapse
2) Remaining tape indication
ª Concerning the remaining tape time
indication on the screen
≥The remaining tape time is indicated in minutes.
(When it reaches less than 3 minutes, the
indication starts flashing.)
≥During a 15 seconds or shorter recording, the
remaining tape time indication may not be
displayed or the remaining tape time may not be
displayed correctly.
≥In some cases, the remaining tape time
indication may display remaining tape time that
is 2 to 3 minutes shorter than the actual
remaining tape time.
Recording check
The last image recorded is played back for 2 to
3 seconds. After checking, the camera will be set
to a recording pause.
≥Set to Tape Recording Mode.
1 Press the joystick to display the icon during
the recording pause. Move the joystick
down until icon
1 appears.
2 Move the joystick left to select the
recording check icon [
].
≥The [RECORDING CHECK STARTED]
indication appears on the screen of the movie
camera.
0h00m10s00f 0h00m10s00f 0h00m10s00f
1)
R 0:30 R 0:30 R 0:30 2)
1
LSQT1130_ENG.book 21 ページ ２００６年１２月１６日 土曜日 午後８時４５分