Panasonic NVGS80EP - Manual (Page 7)

Before using
7
LSQT1130
(29) Tripod receptacle
This is a hole for attaching the camera to optional
tripod/VW-CT45E. (Please carefully read the
operating instructions for how to attach the tripod
to the camera.)
(30) Lens hood
In order to remove the lens hood, rotate it
counterclockwise
1. In order to fit it, rotate it
clockwise 2.
≥Do not fit the accessories on the hood. (Except
for the lens cap)
≥When fitting the MC protector or the ND filter of
the Filter Kit (VW-LF37WE; optional), first
remove the lens hood.
(Refer to the operating instructions for the
accessories.)
Fitting the lens cap
Fit the lens cap to protect the surface of the lens.
≥The lens cap and the lens cap cord come
pre-attached to the grip belt.
≥When not using the lens cap, pull the lens cap
cord in the direction of the arrow. 1
≥When you are not recording, be sure to cover
the lens with the lens cap for protection. 2
≥When you remove the lens cap, press the knobs
firmly.
(29)
1
2
(30)
2
1
LSQT1130_ENG.book 7 ページ ２００６年１２月１６日 土曜日 午後８時４５分