Panasonic NVGS80EP User Manual

Page 49

Advertising
background image

Others

49

LSQT1130

ª

About the cassette

Never place the cassette in a high temperature
place.
≥The tape may be damaged, producing

mosaic-like noise at the time of playback.

When storing the cassette after use, be sure
to rewind the tape to the beginning and take it
out.
≥If the cassette is left for more than 6 months

(depending on the storage condition) in the
movie camera or stopped midway, the tape may
sag and be damaged.

≥Once every 6 months, wind the tape to the end

and then rewind it to the beginning. If the
cassette is left for 1 year or longer without
winding or rewinding, the tape may be deformed
by expansion or shrinkage attributable to
temperature and humidity. The wound tape may
stick to itself.

≥Dust, direct sunlight (ultraviolet rays), and

humidity may damage the tape. Such usage
may cause damage to the movie camera and
the heads.

≥After use, be sure to rewind the tape to the

beginning, put the cassette in the case to
protect it from dust, and store it upright.

Keep the cassette away from strong
magnetism.
≥Apparatuses using magnets such as magnetic

necklaces and toys have magnetic force that is
stronger than expected, and they may erase the
contents of a recording or may increase noise.

ª

LCD monitor/viewfinder

LCD monitor
≥When the LCD monitor gets dirty, wipe it with a

dry soft cloth.

≥In a place with drastic temperature changes,

condensation may form on the LCD monitor.
Wipe it with soft dry cloth.

≥If your movie camera is extremely cold, the LCD

monitor is slightly darker than usual immediately
after you turn the power on. However, as the
internal temperature increases, it goes back to
normal brightness.

Viewfinder

ª

Periodical check-ups

≥To maintain the highest image quality, we

recommend replacing worn parts such as heads
after approx. 1000 hours of use. (This, however,
depends on operating conditions including
temperature, humidity and dust.)

Extremely high precision technology is
employed to produce the LCD monitor
screen featuring a total of approximately
123,000 pixels. The result is more than
99.99% effective pixels with a mere 0.01% of
the pixels inactive or always lit. However,
this is not a malfunction and does not affect
the recorded picture.

Extremely high precision technology is
employed to produce the viewfinder screen
featuring a total of approximately
113,000 pixels. The result is more than
99.99% effective pixels with a mere 0.01% of
the pixels inactive or always lit. However,
this is not a malfunction and does not affect
the recorded picture.

LSQT1130_ENG.book 49 ページ 2006年12月16日 土曜日 午後8時45分

Advertising