Attaching or removing the comb attachments, Using the trimming height comb attachment – Panasonic ERGS60 User Manual

Page 10

Advertising
background image

10

English

2

2

Put the power plug into a household outlet.

• The charge indicator lamp glows red.

• Charging time differs depending on the rated voltage.

Charging time

RE7‑69

220 V

Approx. 10 hours

230 V

Approx. 8 hours

RE7‑74 for
the United
Kingdom

220 V

Approx. 12 hours

240 V

Approx. 8 hours

• When charging the clipper for the first time or when it has

not been in use for more than 6 months, the charge
indicator lamp may not glow for a few minutes, or the
operating time may shorten. Please charge it for more than
20 hours in such cases.

3

3

Disconnect the power plug after charging is
completed.

• To keep charging the battery will not affect battery performance.

• Recommended ambient temperature for charging is

0 – 35 °C. The battery may not charge properly or not at all
under extreme low or high temperatures.

• The charge indicator lamp glows and stays on until the

power plug is disconnected from a household outlet.

• A full charge supplies enough power for approximately

40 minutes of use.

Note
You cannot operate the clipper while charging.

Attaching or removing the comb attachments

• Make sure that the clipper is turned off.

1 mm comb attachment

Attach/remove the comb attachment to/from the main body.

• It will make a clicking sound when attached correctly.

Trimming height comb attachment

Attach to/remove from the main body while pressing on the 3 mm
adjustment buttons.

• It will make a clicking sound when attached correctly.

Using the trimming height comb attachment

• Make sure that the clipper is turned off.
1. Mount the trimming height comb

attachment to the main body.

2. Slide up and down while pressing on

the 3 mm adjustment buttons.

Advertising