Panasonic ERGS60 - Manual (Page 11)

11
English
3. Slide the trimming height adjustment
lever to the left or right and adjust the
trimming height indication mark to the
number indicating the desired length.
Trimming
length
(estimate)
3 mm
adjustment
scale and the
3 mm
adjustment
indicator
positions
The trimming height adjustment
lever and the trimming height
indicator positions
2 mm
2 mm 3 mm 4 mm
3 mm
4 mm
5 mm
5 mm 6 mm 7 mm
6 mm
7 mm
8 mm
8 mm 9 mm 10 mm
9 mm
10 mm
• To trim to 1 mm length, use the 1 mm comb attachment.
• It can also be used without the comb attachment.
(Trimming height: approx. 0.5 mm)
• Actual hair length will be a little longer than the height you set.
Using the clipper
• Make sure there is no damage to the blade.
• We recommend using the clipper in an ambient temperature
range of 0 – 35 °C. If used outside this range, the appliance may
stop operating.
Trimming the entire area in wet
• Trim in dry when trimming without the comb attachment.
• Wet trimming is recommended when trimming to approximately
5 mm or shorter lengths.
• When trimming in wet, you may not get desired results
depending on the length of the hair before trimming (should be
approximately 10 mm or longer) and/or hair condition (permed
hair, etc.).
For such cases, it is recommended to trim in dry.
1 1
Lather hair with a shampoo.
• Do not use any hair washing agent other than shampoo.
2 2
Softly remove the foam with your hands.
• Hair trimmings can easily accumulate on the comb
attachment when there is too much foam.
3 3
Attach the desired comb attachment to the
main body.