Panasonic SCHC15EP - Manual (Page 5)

RQTX1246
5
E
N
G
L
IS
H
ENGL
ISH
5
Discs
Playing discs
1 Press [CD x, OPEN/CLOSE] on the main unit to open the
sliding door.
Put in a disc with the label facing towards you.
Press [CD x, OPEN/CLOSE] again to close the sliding door.
2 Press [CD] and then press [4/9] to start playback.
Keep fingers away from the sliding door when it is closing.
Click!
Making the connections
Conserving power
The system consumes approximately 0.2 W when it is in standby mode.
Disconnect the power supply if you do not use the system.
Some settings will be lost after you disconnect the system. You have to
set them again.
1 Connect the FM indoor antenna.
Place the antenna where reception is best.
2 Connect the AM loop antenna.
3 Connect the AC mains lead.
Use the included AC mains lead with this system only.
Do not use an AC mains lead from other equipment.
Note:
• These speakers do not have magnetic shielding. Do not put them
near TVs, PCs or other equipment easily influenced by magnetism.
• You cannot remove the net of the speakers.
Adhesive tape
Click!
Stop playback Press [8] during playback.
Pause
playback Press [4/9] during playback.
Press again to continue playback.
Skip album
Press [R, T].
Skip track Press [2] or [6] (main unit: [2/3] or
[5/6]).
Search
through track
Press and hold [3] or [5] (main unit:
[2/3] or [5/6]).
Playmode function
1 Press [PLAY MENU] to select “PLAYMODE”.
2 Press [Y, U] and then press [OK] to select the desired mode.
OFF
PLAYMODE Play all tracks.
1-TRACK
1-TR
Play one selected track on the disc.
Press the numeric buttons to select the track.
Playback starts from the selected track.
1-ALBUM
1ALBUM
Play one selected album on the disc.
Press [R, T] to select the album.
RANDOM
RND
Play a disc randomly.
1- ALBUM
RANDOM
1ALBUM RND
Play all tracks in one selected album randomly.
Press [R, T] to select the album.
Note:
• During random playback, you cannot skip to tracks which have been
played or press the numeric buttons.
• This function does not work with “Program playback”.
• The setting returns to default “OFF PLAYMODE” when you open the
sliding door.
Repeat playback
You can repeat “Program playback” or other selected “Playmode
function”.
1 Press [PLAY MENU] to select “REPEAT”.
2 Press [Y, U] to select “ON REPEAT” and then press [OK].
“ ” is shown.
To cancel, select “OFF REPEAT”.
Program playback
This function allows you to program up to 24 tracks.
1 Press [PROGRAM] in the stop mode.
“PGM” is shown.
2 Press the numeric buttons to select the desired track.
Do this step again to program other tracks.
3 Press [4/9] to start playback.
SC-HC15_EP_01en.indd 5 SC-HC15_EP_01en.indd 5 3/11/2011 5:24:19 PM 3/11/2011 5:24:19 PM