Aastra Telecom M760E - Manual (Page 22)

16
Using the attendant console
16
The display will alert you when an external call is received:
In addition, the lamp associated to the PUBLIC EXCHANGE 1
key blinks.
- Press the PUBLIC EXCHANGE 1 programmed key to take
the call.
The associated lamp goes out, unless another external call has
been received.
A communication circuit is then enabled and the associated
supervision key lamp switches to steady (e.g. CCO1 programmed
key).
The display shows you information on the origin of the call*:
. location,
. caller’s name (where possible, the caller’s number will also
be shown).
PE2:00 PE1:01 INT:00 TL:00
Comm Status Funct. More
Answering an
external call:
Answering calls
When enabled, the attendant console displays incoming calls and the associated programmed
key lamps blink.
Note: the set is shown to be free when at least one position is available, i.e. when a CCO key is
free (lamp not lit). A CCO is a communication circuit; the CCO keys are used to manage several
calls at the same time.
Incoming calls are arranged in four categories according to their origin: external - internal - TL
(Tie Lines) or return call.
* Depending on the features provided by your system operator
CCO1
PUBLIC
EXCHANGE 1