Aastra Telecom M760E - Manual (Page 23)

17
Using the attendant console
The display tells you when you receive an internal call:
The lamp associated to the SERVICE LINES key blinks.
- Press the SERVICE LINES programmed key to take the call.
The associated lamp goes out, unless another external call has
been received.
PE2:00 PE1:00 INT:01 TL:00
Comm Status Funct. More
Answering an
internal call:
A communication circuit is then enabled and the associated
supervision key lamp switches to steady (e.g.: CCO2 programmed
key).
The display will show you information on the origin of the
call*:
. the caller’s name or number,
. the name of the company or department.
The display tells you when you receive a call from a tie line:
The lamp associated to the TIE LINE key blinks.
- Press the PUBLIC EXCHANGE 2 key to take the call.
The corresponding lamp will go out, unless another local call
has been received.
A communication circuit is then enabled and the associated
supervision key lamp switches to steady (e.g. CCO3
programmed key).
The display will show you information on the origin of the
call*.
Answering
a tie line call:
PE2:00 PE1:00 INT:00 TL:01
Comm Status Funct. More
* Depending on the features provided by your operator
SERVICE
LINES
CCO2
TIE LINES
CCO3