Aastra Telecom M760E - Manual (Page 33)

Attendant console services
27
8 - Press Enter when you are finished.
The display shows the number programmed.
. You may also use Modify and Cancel to change or delete the
number shown.
To consult the abbreviated numbers programmed:
1 - Press the
Abbrev # interactive key.
2 - Press the See interactive key.
3 - Dial the extension number .
4 - Press the Enter interactive key.
5 - Press the Next interactive key consecutively to display the
numbers.
Note: use the
red key to end the sequence and return to idle
mode.
Enter
Consulting charges
billed to an extension: This feature is used to see the number of billing units charged
by the network operator to a given extension since the billing
counters were last reset.
1 - Press the Invoice interactive key.
The display asks you to enter the number of the extension for
which you wish to check the number of units used.
2 - Enter the extension number .
. Press the Erase interactive key to correct an error.
3 - Press the Enter interactive key.
The display shows the counter and the date it was last reset.
To reset the counter:
- press the
Cancel interactive key, then
- press the Yes interactive key to confirm.
Note: the password is required only for the first cancel operation,
as long as you are still in the
Invoice menu. You can obtain
this password from your system operator.
To check another extension:
- press
Other .
Note: use the red key to end the sequence and return to idle
mode.
Invoice
Enter
Cancel
Other
Yes
Abbrev#
See
Enter
Next