Allied Telesis AR44xS series - Manual (Page 24)

Features in 276-04 24
Version 276-05
C613-10474-00 REV D
Level 4
CR Module Level Description
AR
44xS/
AR4
50S
AR
7x5
AR
750S
Ra
p
ier
i
A
T-
8
800
A
T-
8
600
A
T-
8
700XL
A
T-
8
948
A
T-
9
900
A
T-
9
800
CR00001359 Eth, Bridge,
Switch, LLDP,
IP Gateway
4 For all Ethernet-like interfaces, the router or switch now uses an ifType value of
ethernetCsmacd, instead of the deprecated value of iso88023Csmacd. Y - Y Y Y Y Y - - -
CR00009443 Core 4 If the router had a temperature lower than zero, it displayed the temperature as
a positive number in, for example, the command show system. For example, if
the temperature was -1°C, it displayed 254.
This issue has been resolved. Negative temperatures are now displayed correctly.
- - Y - - - - - - -
CR00010427 PPP,
IP Gateway
4 When a user entered the command reset ppp=instance to reset a PPP interface
with a dynamically allocated IP address, the router or switch produced an
erroneous log message.
This issue has been resolved.
Y - Y Y Y - - - - -
CR00011098 IPsec, ISAKMP,
Firewall, Utility
4 If two IPsec peers both initiate negotiation of a secure IPsec connection at exactly
the same time, two IPsec SA bundles will be created for what is essentially only
a single VPN connection. Previously, when one peer's IPsec SA bundles soft-
expired, the peer would re-negotiate both SA bundles, even though only one SA
bundle would be used.
This issue has been resolved, so that only one bundle will be re-negotiated when
multiple identical SA bundles exist.
Y - Y Y Y - - - - -