Allied Telesis AR44xS series - Manual (Page 55)

Features in 276-01 55
Version 276-05
C613-10474-00 REV D
CR00008742 Switch 2 Previously, if a switch port’s learn limit was changed to a number that was less
than the currently-learned number of MAC addresses, you were unable to delete
the learned MAC addresses. The switch also did not lock the port.
This issue has been resolved. The switch now deletes all learned MAC addresses
and starts learning again.
- - - Y Y Y Y Y Y Y
CR00008791 PIM 2 Previously, Layer 2 switching of multicast traffic did not always operate correctly
when Layer 2 and Layer 3 multicast were being used at the same time.
This issue has been resolved.
- - - Y Y - - Y Y Y
CR00009236 BGP 2 For BGP prefixes learned from an external EBGP peer, which were subsequently
distributed within the router or switch’s own AS via Route Reflection, the
teaching time to the IBGP peers was excessively slow.
This issue has been resolved.
Y Y Y Y Y - - Y Y Y
CR00009386 SSH 2 Previously, when the router or switch had encryption hardware installed, a slow
memory leak occurred after multiple consecutive SSH connections were
established.
This issue has been resolved.
- Y - Y - - - - - -
CR00010232 STP 2 STP and RSTP did not work correctly when a static MAC filter was added.
This issue has been resolved, so that control traffic is not incorrectly discarded in
the presence of configured switch filters. Also, configured switch filters are now
applied to locally generated control traffic.
- - - Y Y Y Y Y Y Y
CR00010278 IP 2 Multihomed IP interface addresses could not be used as the default local IP
address.
This issue has been resolved.
Y Y Y Y Y Y Y Y Y Y
CR00010307 Switch 2 Invalid entries were sometimes added to the hardware IP table.
This issue has been resolved.
- - - - - - - Y Y -
CR Module Level Description AR44x
S /
AR4
50S
AR
7
x
5
A
R
7
50S
Ra
p
ie
r i
A
T
-880
0
A
T
-860
0
A
T
-870
0X
L
A
T
-894
8
A
T
-990
0
A
T
-980
0