Panasonic NNSD278SEPG - Manual (Page 9)

En-7
English
Delay Start Cooking
By using Delay/Stand Pad, you can program Stand Time after cooking is completed or use to
program the oven as a minute timer.
By using Delay/Stand Pad, you are able to program Delay Start cooking.
•
Press
Delay/
Stand Pad.
•
Press Start Pad.
e.g.
•
Set the desired
cooking program
and cooking time.
•
Press Start Pad.
e.g.
High Power: 4 min. Stand Time: 5 min. High Power: 2 min.
Stand Time
Once
•
Set the delay time by
turning the Time/
Weight Dial (up to 9
hours). •
Set the desired cooking
program and cooking time.
2. If the programmed delay time exceeds one hour, the time will count down in units of minutes. If
less than one hour, the time will count down in units of seconds.
3. Delay Start cannot be programmed before any Auto Programs.
Delay Start: 1 hour
NOTE:
1. Three stage cooking can be programmed including Delay Start cooking.
e.g.
High Power: 10 min. Simmer Power: 20 min.
•
Press
Delay/Stand
Pad.
•
Set desired amount of time by
turning the Time/Weight Dial
(up to 9 hours).
NOTE:
1. Three stage cooking can be programmed including Stand Time.
e.g.
2. If the oven door is opened during the Stand Time or Minute Timer, the time in the display window
will continue to count down.
3. This feature may also be used as a timer. In this case press Delay/Stand Pad, set time and press
Start Pad.
22L solo EP Eng :19L solo EP Eng 30/1/08 14:51 Page 7