Smart Technologies SMART Table 230i - Manual (Page 10)

If you must extend the power cable across the floor, ensure it’s properly marked to prevent a trip
hazard. SMART Technologies recommends that you connect the power cable to a power bar rather
than directly to an outlet. If you lose the cable, or if it becomes damaged, contact your support
representative for a replacement.
Keys
The keys allow you to lock the cabinet to prevent unwanted access to the
computer and projector. Store the keys in a convenient, safe location.
Projector remote control
The projector remote control is stored on the inside of the cabinet. You don’t need the remote control
while using the table, but SMART recommends that you keep it inside the cabinet so you can easily
locate it when you need to turn the projector on or off or to adjust the projector’s settings while
servicing the table.
Installation instructions
Follow the SMART Table 230i textless installation instructions ( smarttech.com/kb/170197 ) to
unpack and set up your SMART Table.
Warranty information
Retain the warranty information in case an issue occurs with your SMART Table during the warranty
period.
Using your SMART Table with other SMART
products
The SMART Table complements several SMART products including SMART Board interactive
whiteboards, SMART Sync software and SMART Document Cameras. You can easily transfer files
from your computer directly to the SMART Table using SMART Syncsoftware or a USB drive. You
can connect a SMART Document Camera directly to the SMART Table, allowing students to capture
images in real-time and explore them on the table’s surface.
C H A P T E R 1
Getting started
4