Smart Technologies SMART Table 230i - Manual (Page 25)

Appendix A: Troubleshooting
Troubleshooting power and connection issues 19
Setting up your table for troubleshooting touch issues 20
Restarting SMART Table Activities 21
Diagnosing basic problems with touch 22
Remodeling the background 24
If you set up your SMART Table following the procedures in the SMART Table 230i textless
installation instructions ( smarttech.com/kb/170197 ) included with your table, touch should work
without any problems. However, if your table behaves unexpectedly, follow the procedures in this
chapter to resolve any issues. You can also visit smarttech.com/support to view and download how-
to and troubleshooting articles and more.
Troubleshooting power and connection issues
I M P O R T A N T
Turn off your SMART Table before checking or disconnecting cables inside the cabinet.
The following table presents solutions if the table isn’t operating properly:
Issue Solution
The table isn’t receiving power. Check that the computer’s power cable is securely plugged in.
The Reset button’s blue
indicator isn’t illuminated.
Check that the computer’s power cable is securely plugged in.
There’s no image on the table's
screen.
The projector didn’t start properly due to a power interruption or
reset.
Use the projector’s remote control to turn on the projector.
Appendix A
19