Smart Technologies SMART Table 230i - Manual (Page 29)

Issue Solution
Touch isn’t working, and the
SMART Tables Activities menu
appears.
The camera drivers didn’t load in the correct sequence.
To restart the drivers in sequence
1. Set up your table for troubleshooting. (See Setting up your
table for troubleshooting touch issues on page 20.)
2. Click SMART Touch Service, and then select Options >
Settings.
The SMART Touch Options dialog box appears.
3. Press Restore Defaults, and then check to see if touch is
working properly.
4. Restart the table to load the drivers in sequence.
You followed the solutions in
this table but touch still isn’t
working.
Remodel the background. (See Remodeling the background on the
next page.)
A P P E N D I X A
Troubleshooting
23