Smart Technologies SMART Table 230i - Manual (Page 13)

Turning off your SMART Table
N O T E S
l
You can’t use the Reset button to turn off the SMART Table.
l
If you press the Reset button for more than 30 seconds, the computer restarts but the
projector stays on.
The following procedure shows the correct way to turn off your SMART Table.
g To turn off your table
1. From the SMART Table Activities menu, press .
The button moves to another corner.
2. Repeat step 1 for the number of students you’ve set up your table for.
A message appears, informing you that the computer shutdown process will begin in 30
seconds.
C A U T I O N
o Do not disconnect the power cable or turn off the power bar until after the fans turn off.
Disconnecting the power cable or turning off the power bar at any other time can
shorten the projector lamp's life.
o To prevent a power surge, wait 60 seconds before plugging in the power cable again.
T I P S
o A chime sound plays when the message first appears. This is useful in situations
where you’re away from the SMART Table and the students accidentally press
.
o Press Cancel if you accidentally press .
C H A P T E R 2
Using your SMART Table
7