Aviom AV-P2 - Manual (Page 24)

30 31
Specifications
Audio Outputs 2, impedance balanced line-level
5.0 mm Euroblock connectors, female, panel-mount
2 male Euroblock connectors supplied in box
Screw terminals: Audio +; Audio -; Ground
Channel Selection 16-position rotary switch
D/A Conversion 48kHz, 24-bit
Output Levels Variable: +4dBu to -31dBu in 1.5dB increments
6-position DIP switch, per channel
Indicators LEDs; red: Power, green: A-Net Active,
yellow: Stereo Pair
Output Impedance 100 ohms
Signal to Noise
(unweighted) 93dB typical, A/D to D/A
Measured from AN-16/i Input Module to AV-P2
Freq. Response 4Hz–22kHz +0.2dB/-3dB
THD +N -93dB at -10dBFS
Crosstalk -85dB at 1kHz
Bit Error Rate (BER) 10 -12
Digital Connections A-Net In: 1; A-Net Out: 1; RJ45 connectors
Pro16™ A-Net ® Uses unshielded Cat-5e UTP (or better) cable
Latency 0.880 msec (measured from analog input to
analog output)
Power Supply
Input Voltage
Output Voltage
Plug Size
External, DC, universal switching type
100–240 volts, 50/60Hz, 30VA
18–24 VDC, 0.5 amp
2 mm, locking, center pin hot
Dimensions 7.45” (189.2 mm) wide x 7” (177.8 mm) deep; 1U high
Weight 3.4 lbs (1.54 kilo)
All Aviom products are designed and manufactured in the USA.
Dimensions