Panasonic KXTGD224 - Manual (Page 15)

Making calls
1
Lift the handset and dial the phone
number.
R To correct a digit, press MCLEARN.
2
M N
3 When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Using the speakerphone
1
Dial the phone number and press MZN.
2
When you finish talking, press MOFFN.
Note:
R To switch back to the receiver, press MZN/
M N.
Adjusting the receiver or speaker
volume
Press MDN or MCN repeatedly while talking.
Making a call using the redial list
The last 5 phone numbers dialed are stored in
the redial list (each 48 digits max.).
1
MEN REDIAL
2
MbN: Select the desired phone number.
3 M N
Erasing a number in the redial list
1
MEN REDIAL
2
MbN: Select the desired phone number.
a MERASEN
3
MbN: “Yes” a MSELECTN a MOFFN
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 20).
Example: If you need to dial the line access
number “9” when making outside calls with a
PBX:
1
9 a MDN (Pause)
2 Dial the phone number. a M N
Note:
R A 3.5 second pause is inserted each time
you press MDN (Pause) on the handset.
Answering calls
1
Lift the handset and press M N or M N
when the unit rings.
2
When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Any key answer: You can answer the call by
pressing any dial key.
Auto talk: You can answer calls simply by
lifting the handset (page 23).
Temporary handset ringer off: You can turn
the ringer off temporarily by pressing M
N.
Adjusting the handset ringer volume
Press MDN or MCN repeatedly to select the
desired volume while ringing.
Adjusting the base unit ringer volume
Available for:
KX-TGD220 series (page 3)
Press MjN or MkN repeatedly to select the
desired volume.
R To turn the ringer off, press and hold MkN
until the unit beeps.
For assistance, please visit http://www.panasonic.com/help 15
Making/Answering Calls
TGD2xx_(en_en)_1209_ver.040.pdf 15 2013/12/09 10:59:19