Panasonic KXTGD224 - Manual (Page 31)

Resetting to a pre-recorded greeting
message
If you want to use a pre-recorded greeting
message once you record your own greeting
message, you need to erase your own
greeting message.
1
MMENUN#304
2
MYESN a MOFFN
Playing back the greeting
message
1
MMENUN#303
2 To exit, press MOFFN.
Listening to messages
Using the base unit
When new messages have been recorded:
– M
N on the base unit flashes.
– “New message” is displayed.
Press M
N (PLAY).
R If new messages have been recorded, the
base unit plays back new messages.
R If there are no new messages, the base
unit plays back all messages.
Operating the answering system
during playback
Key Operation
MjN or MkN Adjust the speaker
volume
M N Repeat message *1
M N Skip message
M N (STOP) Stop playback
MERASEN Erase currently playing
message
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
Erasing all messages
Press MERASEN 2 times while the unit is not in
use.
Using the handset
When new messages have been recorded,
“New message” is displayed.
1
To listen to new messages:
MMENUN#323
To listen to all messages:
MMENUN#324
2
When finished, press MOFFN.
Note:
R You can also use the MPLAYN soft key, if
displayed, to play new messages.
R To switch to the receiver, press M N.
Operating the answering system
MMENUN a MbN: “Answering device” a
MSELECTN
Key Operation
MDN or MCN Adjust the receiver/speaker
volume (during playback)
1 or MFN Repeat message (during
playback)
*1
2 or MEN Skip message (during
playback)
3 Enter the “Settings” menu
4 Play new messages
5 Play all messages
6 Play greeting message
76 Record greeting message
8 Turn answering system on
MPAUSEN Pause message *2
9 or
MSTOPN Stop recording
Stop playback
0 Turn answering system off
*4 *3 Erase currently playing
message
*5 Erase all messages
For assistance, please visit http://www.panasonic.com/help 31
Answering System
TGD2xx_(en_en)_1209_ver.040.pdf 31 2013/12/09 10:59:20