Panasonic KXTGD224 - Manual (Page 24)

Sub-menu 1 Sub-menu 2 Settings Code
Set tel line Set dial mode *2 Pulse
<Tone> #120 14
Set flash time *2, *8 900 ms
<700 ms>
600 ms
400 ms
300 ms
250 ms
200 ms
160 ms
110 ms
100 ms
90 ms
80 ms #121 16
Set line mode *2, *9 A
<B> #122 –
Call sharing *2 – <On>
Off #194 16
Registration Register handset – #130 27
Deregistration *3 – #131 27
Change
language Display <English>
Español #110 13
Voice prompt *1, *2 <English>
Español #112 13
Main menu: “Customer support”
Operation Code
Displaying customer support Web address. #680 –
*1 KX-TGD220 series: page 3.
*2 If you program these settings using one of the units, you do not need to program the same
item using another unit.
*3 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*4 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select “Caller ID auto”. To turn this feature off, select
“Manual”. (Caller ID subscribers only)
To use this feature, set the date and time first (page 13).
*5 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to
2). If you select a melody, you cannot distinguish lines by their ringers.
*6 The preset melodies in this product (“Tone 3” - “Tone 5”, “Melody 1” - “Melody 10”)
are used with permission of © 2012 Copyrights Vision Inc.
*7 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
24 For assistance, please visit http://www.panasonic.com/help
Programming
TGD2xx_(en_en)_1209_ver.040.pdf 24 2013/12/09 10:59:19