Avaya 3720 - Manual (Page 26)

26 Avaya 3720 DECT Telephone - User Guide 11/2010
In idle mode, and number input mode
● A short press on a key enter the digits 0 - 9 and the characters * and #.
● Enter a pause in number input mode by a long press on the #-key. A pause is indicated by
a P in the display.
● A long press on the *- key changes the tone sender on.
Tone sender on is indicated by a T in the display.
In text input mode
● A short press on a key 0 - 9, displays the first available character on that specific key. The
marked character is selected after a timeout, or when another key is pressed.
● To change to upper/lower case, press the *-key before entering the character.
The *-key can also be used to display only the digits.
● To add space in the text, make a short press on key 0.
● The first character entered in a message, or when adding/editing a name in the menu
Contacts, will be an upper level character followed by lower level characters, unless the
*-key is pressed before entering the character. To switch between Abc, ABC, abc, and 123
the *-key is pressed.
● A long press on the key # displays special characters.
● To delete a character, position the prompt right from the character to delete and press Soft
key Clear.
Accessories
Belt Clips
Two belt clip options are available:
● Hinge-type clip
To prevent the telephone from slipping out of for example pocket or belt
● No clip
To be able to use the telephone without a clip
Telephone lanyard
The Telephone lanyard is 800 mm long. The lanyard is attached directly to the telephone.