Panasonic HC-V130K - Manual (Page 17)

- 17 -
The clock is not set at the time of purchase. Make sure to set the clock.
¬ Change the mode to .
1
Select the menu. ( l 26 )
2
Select the date or time using 2/1 and set the desired value using 3/4.
A Displaying the World time setting
(
l 27 ):
[HOME]/ [DESTINATION]
≥ The year can be set between 2000 and 2039.
3
Press the ENTER button.
≥ A message prompting for World Time setting
may be displayed. Perform the World Time setting by pressing the ENTER button. ( l 27 )
≥ Press the MENU button to complete the setting.
≥ When the unit is turned on for the first time, a message asking you to set the date and time will
appear. Select [YES] and perform Steps 2 to 3 to set the date and time.
≥ The date and time function is driven by a built-in lithium battery.
≥ If the time display becomes [- -], the built-in lithium battery needs to be charged. To recharge the
built-in lithium battery, connect the AC adaptor or attach the battery to this unit. The battery is still
being recharged even if the unit is off. Leave the unit as it is for approx. 24 hours and the battery
will maintain the date and time for approx. 4 months.
Preparation
Setting date and time
: [SETUP] # [CLOCK SET]