Panasonic HC-V130K - Manual (Page 62)

- 62 -
2
Select the video input on the TV.
≥ Example:
Select the [HDMI] channel with a HDMI mini cable.
Select the [Video 2] channel with an AV cable.
(The name of the channel may differ depending on the connected TV.)
≥ Check the input setting (input switch) and the audio input setting on the TV. (For more
information, please read the operating instructions for the TV.)
3
Change the mode to to play back.
≥ When connecting the device to a television, the television image will not be displayed in the
following cases. Use the device’s LCD monitor.
j Recording video
j When setting PRE-REC
∫ To watch images on a regular
TV (4:3) or when both sides of
the images do not appear on
the screen
Change the menu setting to display the images
correctly. (Check the TV setting.)
≥ If you set the option to [4:3] and connect this
unit and the TV with the AV cable, images or
menu screens may be displayed in a reduced
size.
Example of images with a [16:9] aspect ratio
on a regular TV (4:3)
≥ If a wide-screen TV is connected, adjust the
aspect setting on the TV. (Refer to the
operating instructions of the TV for details.)
∫ To display the on-screen
information on the TV
When the menu setting is changed, the
information displayed on the screen (operation
icon and time code etc.) can be displayed/not
displayed on the TV.
* This setting is only available in recording
mode.
: [SETUP] # [TV ASPECT] # [4:3]
[TV ASPECT] setting
[16:9] [4:3]
: [SETUP] # [EXT. DISPLAY] #
desired setting
[SIMPLE]*: Information partially
displayed
[DETAIL]: All information displayed
[OFF]: Not displayed