ACTiSYS ACT-IR4000US - Manual (Page 19)

The Wireless Connectivity Expert
ACT-IR4000US Series
User’s Manual
11. PRECAUTIONS
To ensure trouble-free operation, please observe the following precautions:
Optical communications are easily affected by external light sources, weak batteries, transfer
distance, transfer angle, etc. Any of these conditions may cause a data transfer failure,
incomplete, missing or incorrect data. Make sure that the wireless interface is away from direct
sunlight and the other strong light source.
z Do not terminate arbitrarily during file transfer process between DUT and computers until finished.
Otherwise DUT internal data integrity may be damaged, which is due to the violation of DUT’s.
z Do not expose the unit to moisture, as this will damage the internal circuitry.
z Do not expose the unit to extreme temperatures. It should not be placed in direct sunlight or in a
closed vehicle, neither should it be placed near heaters nor any other heat sources.
z Do not store the unit in a humid or dusty place.
z Use a soft, dry cloth to clean the unit. Do not use a wet cloth or any solvent.
z Do not drop the unit or handle the unit carelessly.
CAUTION:
z Never touch the pins of computer connection terminal. The internal circuits can be damaged by a
Electro Static Discharge. If this device requires any servicing, use only an ACTiSYS service
dealer, an ACTiSYS approved service facility, or an ACTiSYS repair service.
z When exchanging data with host computer, be sure the appropriate serial communication port is
available and is not in conflict with the other peripheral device or software.
© Copyright 2002-2008 ACTiSYS Corp. Page 19 of 21 Jul 8, 2008
Version 1.6.0.1