Act-ir4000us driver installation for windows xp – ACTiSYS ACT-IR4000US User Manual
Page 9
The Wireless Connectivity Expert
ACT-IR4000US Series
User’s Manual
6. ACT-IR4000US DRIVER INSTALLATION FOR WINDOWS XP
Following are the instructions to properly install ACT-IR4000US Series under Windows XP:
Important: Do
NOT
use Windows’ Native Driver. Please
use the driver on this CD
to
assure a smooth installation. If you have plugged IR4000US into USB port and mistakenly
loaded WindowsXP Native Driver, please refer to Chapter 7 “ACT-IR4000US Windows XP
Native Driver Removal Procedure” to remove the driver and then refer back to this Chapter
to re-install the correct driver.
A. Insert the attached CD to CD-ROM, Windows will display install manual. Please
click Installation, then execute InstallShield Wizard. Please Click on Next to
continue.
B. The Installer will install ACT-IR4000US in the Destination Folder. To install to a
different folder, click Browse and select one. To continue, click on Next.
© Copyright 2002-2008 ACTiSYS Corp.
Page 9 of 21
Jul 8, 2008
Version
1.6.0.1