Panasonic DMC-ZS35W - Manual (Page 140)

- 140 -
Wi-Fi
When using Smart Transfer for the first time, follow the steps below to set it up.
From the next time on, you can change the settings from [Set Destination]
(P142) .
1 Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET]. (P41)
2
Press 3/4 to select [Smart Transfer], and press [MENU/SET].
3 Select the method for connecting to a wireless access point, and set.
•
Refer to P144 for details.
4 Set the transfer destination.
•
For details about the preparations before the transfer, refer to “When sending images to PC” on
P136 .
5
Press 3/4 to select [Auto Transfer], and press [MENU/SET].
6 Press 3/4 to select [ON], and press [MENU/SET].
•
Only the images you recorded when [Auto Transfer] is set to [ON] is transferred.
Configuring [Smart Transfer]
1 Press 3/4 to select a PC you want to connect, and then press [MENU/SET].
2 Press 3/4 to select the folder you want to send, and then press [MENU/SET].