Panasonic DMC-ZS35W User Manual
Page 179
- 179 -
Others
•
When using a printer with a Cropping or borderless printing function, cancel this function before
printing.
(For details, refer to the operating instructions for the printer.)
•
When you order photo studios to print pictures, ask the photo studio if the 16:9 pictures can be
printed.
•
Since aspect ratio of a panorama picture differs from normal pictures, it may not always be possible
to print it correctly.
> Please use a printer that supports panorama pictures.
(For details, refer to the operating instructions for the printer.)
•
Press [MENU/SET], select the [Setup] menu icon [
].
Then press [MENU/SET], and then select the [~] icon to set the desired language.
•
In dark places, the AF Assist Lamp lights red to make it easier to focus on a subject.
•
Is [AF Assist Lamp] on the [Rec] menu set to [ON]?
•
The AF Assist Lamp does not turn on in bright places.
•
The surface of the camera may become warm during use. This does not affect the performance or
quality of the camera.
•
When the brightness changes due to zoom or camera movement, etc., the lens may click and the
picture on the screen may drastically change. However, the picture is not affected. The sound is
caused by the automatic adjustment of the aperture. This is not a malfunction.
•
If you do not use the camera for a long time, the clock may be reset.
> [Please set the clock] message will be displayed; please reset the clock.
The ends of the pictures are cut at printing.
The panorama picture is not printing correctly.
Others
An unreadable language was selected by mistake.
A red lamp sometimes turns on when the shutter button is pressed halfway.
The AF Assist Lamp does not turn on.
The camera becomes warm.
The lens clicks.
The clock is reset.