Panasonic DMC-ZS35W User Manual
Page 178
- 178 -
Others
•
Is the camera connected to the TV correctly?
> Set the TV input to External Input Mode.
•
Depending on the TV model, the pictures may be elongated horizontally or vertically or they may be
displayed with their edges cut off.
•
Are you trying to play back the motion pictures by directly inserting the card in the card slot of the
TV?
> Connect the camera to the TV with the AV cable (optional), or with the HDMI micro cable, and
then play back the motion pictures on the camera.
•
•
Is the camera connected to the PC correctly?
•
Is the camera recognized by the PC correctly?
> Select [PC] when connecting.
> Turn this unit off and on.
•
Disconnect the USB connection cable. Connect it again while the card is inserted in the camera.
•
If there are two or more USB terminal on a single PC, try connecting the USB connection cable to
another USB terminal.
•
Check if your PC is compatible with SDXC memory cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
•
A message prompting to format the card may be displayed when connecting, but do not format.
•
If the [Access] displayed on the monitor does not disappear, disconnect the USB connection cable
after turning this unit off.
•
Pictures cannot be printed using a printer that does not support PictBridge.
> Select [PictBridge(PTP)] when connecting.
TV, PC and printer
The picture does not appear on the television.
The display areas on the TV screen and the camera’s monitor are different.
The motion pictures cannot be played back on a TV.
The picture is not displayed fully on the TV.
Cannot communicate with the PC.
The card is not recognized by the PC.
(The built-in memory is recognized.)
The card is not recognized by the PC.
(SDXC memory card is used)
The picture cannot be printed when the camera is connected to a printer.