Panasonic DMC-GH4KBODY - Manual (Page 182)

7. Flash
182
Setting the Flash Functions
Select whether to set the flash output automatically or manually.
1 Select the menu. (P54)
2 Press 3/4 to select the item and then press [MENU/SET].
• When [MANUAL] is set, the luminosity ratio ([1/1], etc.) is displayed on the flash icon on the
screen.
1 Select the menu. (P54)
2 Press 2/1 to select an item and then press [MENU/SET].
•
You can set from [1/1] (full brightness) to [1/128] in steps of [1/3].
• This item is available only when [Firing Mode] is set to [MANUAL].
Changing the firing mode
Applicable modes:
> [Rec] > [Flash] > [Firing Mode]
[TTL] The camera automatically sets the flash output.
[MANUAL]
Set the luminosity ratio of the flash manually. In [TTL] you can shoot the
photograph you want even when shooting dark scenes that may otherwise be
too brightly lit by the flash.
• This item is not available when an external flash is being used.
Setting the output ratio manually
> [Rec] > [Flash] > [Manual Flash Adjust.]
MENU
MENU