Panasonic DMC-ZS30K - Manual (Page 177)

GPS and map functions
DMC-ZS30
Using the map function
VQT4T08
- 177 -
Displaying only pictures taken in the same area
You can select the area of a picture on a map to narrow down the pictures to be
displayed.
Press [MAP] button in playback mode
Display the map so that the place where you took the pictures
is moved within the display range of the frame
Display range
On the touch screen, spread (pinch out) your 2 fingers to
zoom in, and pinch (pinch in) your 2 fingers to zoom out.
(You can also enlarge or reduce the map size using the zoom
lever.)
Map scale level (The levels that can be displayed vary depending on the region.)
•You can drag the screen or press the cursor button to operate the display location
of a map.
Press [DISP.] button
Place where you took the
selected picture
Place where you took the
pictures displayed in a list
Touch to display another picture
Touch to narrow down the
pictures to be displayed
Picture list
Touch to display another picture
Touch a picture in the picture list to display it
Only pictures taken at a location within the display range of the frame are displayed.
([Filtering Play])
•You can also display a picture by selecting it using the cursor button and pressing
[MENU/SET].
•For information on releasing [Filtering Play], refer to (→133) .
●
When the map is at its maximum size the location where the picture was taken and
the picture list will not be displayed.