Panasonic SC-HTB65 - Manual (Page 17)

Getting started
RQT9763 17
≥ Connect only after all other connections are completed.
≥This system consumes a small amount of AC power (> 25) even when it is turned off. In the interest of
power conservation, if you will not be using this system for a long time, unplug it from the household
AC outlet.
By using the Bluetooth ® connection, you can listen
to the sound from the Bluetooth ® audio device
from this system wirelessly.
Preparation
≥ Turn on the Bluetooth ® feature of the device and
place the device near the main unit.
Press [ ] to select “ ”.
≥ If the “ ” indicator flashes quickly, go to step 3.
Press and hold [ ] until the “ ”
indicator flashes quickly.
≥ If the “ ” indicator flashes slowly, repeat step 2.
Select “SC-HTB70” or “SC-HTB65”
from the Bluetooth ® device’s
Bluetooth ® menu.
≥ If prompted for the passkey on the Bluetooth ® device, enter
“0000”.
≥ Once the Bluetooth ® device is connected, the “ ” indicator
stops flashing and lights up.
You can register up to 8 devices with this system. If a 9th
device is paired, the device that has not been used for the
longest time will be replaced.
Press [ ] to select “ ”.
≥ If the “ ” indicator lights, a Bluetooth ® device is already
connected with this system. Disconnect it. (> below)
Select “SC-HTB70” or “SC-HTB65”
from the Bluetooth ® device’s
Bluetooth ® menu.
∫ Disconnecting a Bluetooth ® device
Press and hold [ ] until the “ ” indicator flashes
slowly.
≥ When “ ” is selected as the source, this system will
automatically try and connect to the last connected
Bluetooth
® device.
≥ The Bluetooth ® device will be disconnected if a different
audio source (e.g. “TV“) is selected.
≥ Refer to the operating instructions of the Bluetooth ® device
for further instruction on how to connect a Bluetooth ®
device.
≥ This system can only be connected to one device at a time.
≥ To change the sound quality, refer to “Bluetooth
®
communication mode” on page 20.
AC power supply cord connection
A To a household AC
outlet
B AC power supply
cord (supplied)
Saving energy
The main unit is designed to conserve its power consumption and save energy.
≥
The main unit will automatically switch to standby mode
when
no signal is input and no operation is performed for approx. 30 minutes.
Bluetooth ® connection
AC IN


Bluetooth ® pairing
Connecting a Bluetooth ®
device
SC-HTB65_70PPC_RQT9763-1P.book Page 17 Thursday, February 7, 2013 4:24 PM