Panasonic SC-HTB65 - Manual (Page 18)

18 RQT9763
Operations
Using this system
Preparation
≥ Turn on the TV and/or connected device.
Press [Í] to turn on the main unit.
Select the source.
≥ This remote control cannot be used to control the operations
of the connected devices.
∫ When “ ” is selected as the source
On the Bluetooth ® device:
Select this system as the output source of the connected
Bluetooth
® device and start the playback.
∫ When “BD/DVD” is selected as the
source
On the TV and the connected device:
Select the TV’s input for the device connected to
“BD/DVD” terminal and start the playback on the
connected device.
Adjust the volume and sound effect
level.
∫ To adjust the volume of this system
Press [i VOL j].
≥ Volume range: 0 to 100 §
∫ To adjust the dialog effect level
This setting will change the level of the Clear-
mode dialog effect. (> 19)
1
Press [i DIALOG LEVEL j] to display the
current level.
2 While the level is displayed:
Press [i DIALOG LEVEL j] to adjust the
level.
∫ To adjust the subwoofer level
1 Press [i SUBWOOFER j] to display the
current level.
2 While the level is displayed:
Press [i SUBWOOFER j] to adjust the level.
≥ The level indication pattern is the same as dialog effect
level.
∫ To mute the sound
Press [MUTE].
≥ While muting, the sound mode indicators blink
simultaneously.
≥ To cancel, press the button again or adjust the volume.
≥ Muting is canceled if the main unit is turned off.
§ The sound mode indicators blink from left to right (i) or from right to left (s) while adjusting.
The indicators will not blink when it has reached the maximum or minimum.
≥ If there is sound coming out of the TV’s speakers, reduce the volume of the TV to its minimum.
≥ If the main unit is turned off with the volume setting in the greater half (above 50), the main unit will automatically lower the
volume to the middle (50) when the main unit is turned on (Volume limitation).
To turn this function off, refer to page 21.
Press To select
[INPUT SELECTOR]
“TV” -------# “BD/DVD”
^-------- “ ”(------}
[ ] “ ” (Bluetooth ® )
DIALOG LEVEL
LINK MODE
PAIRING ----
SOUND
INPUT
SELECTOR
Indication Effect level
4 Highest
3
2
1 Lowest
If this system does not operate as expected or sound is unusual, returning the settings to the
factory preset may solve the problem. (> 22)
SC-HTB65_70PPC_RQT9763-1P.book Page 18 Thursday, February 7, 2013 4:24 PM