Panasonic SC-HTB65 - Manual (Page 6)

6 RQT9763
Control reference guide
1 Standby/on switch (Í/I)
Press to switch the unit from on to standby mode or
vice versa. In standby mode, the unit is still
consuming a small amount of power.
2 Adjust the volume of this system
3 Select the input source
“TV”
------------# “BD/DVD”
^-------- “ ”(------}
4 Speaker angle indicator (> 8)
Angle 1: 0
o tilt
Speaker angle indicator lights green
[HTB70] Angle 2: Tilted at 30 o
Speaker angle indicator lights amber
[HTB70] Angle 3: Tilted at 80 o /90 o
[HTB65] Angle 2: Tilted at 90 o
Speaker angle indicator lights red
5 Input selector indicators §1
A Bluetooth ® indicator
Lights blue when the Bluetooth ® device is the
audio source
B TV indicator
Lights green when the TV is the audio source
C BD/DVD indicator
Lights amber when the device connected to the
BD/DVD terminal is the audio source
6 Sound mode indicators §1
D STANDARD indicator
Lights when STANDARD is the current sound
mode
E STADIUM indicator §2
Lights when STADIUM is the current sound
mode
F MUSIC indicator §2
Lights when MUSIC is the current sound mode
G CINEMA indicator
Lights when CINEMA is the current sound mode
H NEWS indicator
Lights when NEWS is the current sound mode
I STEREO indicator
Lights when STEREO is the current sound mode
7 Remote control signal sensor (> 7)
1 AC IN terminal (> 17)
2 [HTB70] Ir SYSTEM terminal
3 OPTICAL DIGITAL AUDIO IN (TV) terminal
(> 15)
4 BD/DVD terminal (> 15)
5 USB port (for service use only)
§1 The indicators will also blink in various conditions. (> 24)
§2 The indicator blinks for 5 sec when the main unit detects an audio format.
To manually verify the current audio format and the corresponding indicators, refer to page 20
(Audio format indicator).
This system (Front)
1 2 3
7
4 5 6
This system (Rear)
SC-HTB65_70PPC_RQT9763-1P.book Page 6 Thursday, February 7, 2013 4:24 PM