Selecting mode, Clutch torque setting, How to use the belt hook – Panasonic EY7549X User Manual

Page 12

Advertising
background image

- 12 -

Selecting Mode

Select mode Intended use Work material Maximum size
Impact

Fastening Bolt

Nut

High tensil: M12
Standard: M14

Driving Wood screw

Self-drilling screw

9 mm (3/8”)
6 mm (1/4”)

Drill driver
High mode

Driving Wood screw

Self-drilling screw

4.2 mm (1/8”)
6 mm (1/4”)

Drilling Wood

Metal

21 mm (7/8”)
10 mm (3/8”)

Drill driver
Low mode

Driving Wood screw 6.8 mm (1/4”)
Drilling Wood

Metal

35 mm (1-3/8”)
13 mm (1/2”)

WARNING!

This tool must not be used as a drill in

“Impact Driver mode”. During drilling in

steel, the drill bit may break in case of

blocking and this may cause dangerous

cut wounds.

Impact Driver Operation

Select Impact with the mode select
switch.
• Switch to the Impact or Drill driver

High/Low position only when the tool

has completely stopped rotating.

Damage may be caused if the tool is

rotating.

Drill Driver Operation

Select Drill driver High or Low mode
with the mode select switch.
• Switch to the Impact or Drill driver

High/Low position only when the tool

has completely stopped rotating.

Damage may be caused if the tool is

rotating.

Drill driver Low mode

Drill driver High mode

Clutch Torque Setting

Adjust the torque to one of the 21 clutch

set tings or “ ” position.
CAUTION

:

Test the setting before actual opera tion.

Set the scale at this mark ( ).

How to Use the Belt Hook

WARNING!

• Be sure to attach the belt hook securely

to the main unit with the screw firmly

fastened. When the belt hook is not firm-

ly attached to the main unit, the hook

may disconnect and the main unit may

fall.

This may result in an accident or injury.
• Periodically check screw for tightness. If

found to be loose, tighten firmly.

• Be sure to attach the belt hook firmly and

securely onto a waist belt or other belt.

Pay attention that the unit does not slip off

the belt. This may result in an accident or

injury.

• When the main unit is held by the belt

hook, avoid jumping or running with it.

Doing so may cause the hook to slip

and the main unit may fall.

This may result in an accident or injury.

EY7549.indb 12

EY7549.indb 12

2013-10-17 18:34:47

2013-10-17 18:34:47

Advertising