Important safety instructions – Panasonic EY7549X User Manual

Page 7

Advertising
background image

- 7 -

III. FOR BATTERY

C H A R G E R &

BATTERY

PACK

Important Safety Instructions

1)

SAVE THESE INSTRUCTIONS

-This manual contains important

safety and operating instructions for

battery charger.

2) Before using battery charger, read all

instructions and cautionary markings

on battery charger, battery pack, and

product using battery pack.

3)

CAUTION -To reduce the risk of in-

jury, charge only Panasonic Battery

Pack as shown in last page.

Other types of batteries may burst

causing personal injury and damage.

4) Do not expose charger and battery

pack to rain or snow.

5)

To reduce risk of damaging the electric

plug and cord, pull by plug rather than

cord when disconnecting charger.

6)

Make sure cord is located so that it will

not be stepped on, tripped over, or oth-

erwise subjected to damage or stress.

7) An extension cord should not be

used unless absolutely necessary.

Use of improper extension cord

could result in a risk of fire and elec-

tric shock. If extension cord must be

used, make sure that:

a. pins on plug of extension cord are

the same number, size and shape

as those of plug on charger.

b. extension cord is properly wired

and in good electrical condition.

c. wire size is large enough for

ampere rating of charger as

specified

below.

RECOMMENDED MINIMUM AWG SIZE

OF EXTENSION CORDS FOR BATTERY

CHARGERS

AC Input
Rating.

Amperes AWG Size of Cord

Equal to or
greater than

But less
than

Length of Cord,
Feet
25

50

100 150

0

2

18

18

18

16

8)

Do not operate charger with damaged

cord or plug-replace them immediately.

9)

Do not operate charger if it has re-

ceived a sharp blow, been dropped, or

otherwise damaged in any way; take it

to a qualified service personnel.

10) Do not disassemble charger; take

it to a qualified service personnel

when service or repair is required.

Incorrect reassembly may result in a

risk of electric shock or fire.

11)

To reduce the risk of electric shock,

unplug charger from outlet before at-

tempting any maintenance or cleaning.

12) The charger and battery pack are spe-

cifically designed to work together. Do

not attempt to charge any other cordless

tool or battery pack with this charger.

13) Do not attempt to charge the battery

pack with any other charger.

14) Do not attempt to disassemble the

battery pack housing.

15) Do not store the tool and battery pack

in locations where the temperature

may reach or exceed 50°C (122°F)

(such as a metal tool shed, or a car in

the summer), which can lead to dete-

rioration of the storage battery.

16) Do not charge battery pack when the

temperature is BELOW 0°C (32°F)

or ABOVE 40°C (104°F). This is very

important in order to maintain opti-

mal condition of the battery pack.

17) Do not incinerate the battery pack. It

can explode in a fire.

18) Avoid dangerous environment. Do not

use charger in damp or wet locations.

19) The charger is designed to operate

on standard household electrical

power only. Do not attempt to use it

on any other voltage!

20) Do not abuse cord. Never carry

charger by cord or yank it to discon-

nect from outlet. Keep cord away

from heat, oil and sharp edges.

21) Charge the battery pack in a well

ventilated place, do not cover the

charger and battery pack with a

cloth, etc., while charging.

22) Use of an attachment not recom-

mended may result in a risk of fire,

electric shock, or personal injury.

23) Do not short the battery pack. A bat-

tery short can cause a large current

flow, over heating and create the risk

of fire or personal injury.

EY7549.indb 7

EY7549.indb 7

2013-10-17 18:34:46

2013-10-17 18:34:46

Advertising