Panasonic TYTP42P8S - Manual (Page 26)

26
To continue the calibration, click on the mouse.
(To terminate, press any key)
Touch on the center of the target.
(To terminate, press any key)
Setup program
Calibration Mode
Pressing the [Calibration] button on the main window activates the calibration screen to carry out calibration of the
detection of the Touch Panel and PC (in order to place the mouse cursor at the touched position).
Briefly touch the center of the target displayed on the screen in order as they appear.
Target is displayed in the order of upper left, bottom left, and upper right.
To stop calibration, press any key on the keyboard.
Once calibration is carried out, the calibrated value is saved in the setting file. Since the calibrated value is read
from the setting file at the time of the next startup, there is no need to carry out calibration again.
∗
Calibration Screen is indicated in order as follows.
In case of normal setting