Panasonic TYTP42P8S User Manual
Page 8
8
Never attach a plasma display onto the touch panel by placing the touch panel on
a flat surface. Doing so may damage the infrared sensor on the touch panel.
If you cause a malfunction by attempting attachment in this way, you will be charged
for repairs.
Attachment precautions
Attach the mounting bracket. [A]
(TY-TP42P8-S)
(1) Orientate the mounting bracket [A] so that the side lined
with cushion faces the touch panel.
(2) During attachment of the touch panel to the display, lift
the bracket to its highest point so that it does not strike
the display and tentatively fasten to the upper part of 2
points to the left and right.
Attach the mounting bracket. [B]
(TY-TP50P8-S)
(1) Orientate the mounting bracket [B] so that the side lined
with tape faces the touch panel.
(2) During attachment of the touch panel to the display, lift
the bracket to its highest point so that it does not strike
the display and tentatively fasten to the upper part of 2
points to the left and right.
Be careful not to strike the touch panel on the display.
1
Attach the touch panel to the display front surface.
Attachment of the touch panel to the plasma display
2
Stand
Plasma Display
Touch Panel
Mounting
bracket
[A] or [B]
Touch panel
(Rear Side)
Mounting
Screw
[A]
3
Attach mounting bracket [C]
Attach the mounting bracket. [C]
(For TY-TP50P8-S Only)
Screw [C]
Mounting bracket [C]
Tentatively fasten a fixing screw in the left and right speaker mounting screw holes on the rear of the touch panel
and plasma display to attach the mounting bracket [C].
Pad (Cushion)